Untitled Document

Camera Type: Autofocus, 6 x 4.5cm, Single-Lens-Reflex camera - Dual platform: Accepts film and compatible digital backs

Film Back/Loading: Interchangeable type; Accepts film insert which switches from 120 to 220 film by rotating pressure plate
External LCD Display on film magazine shows ISO speed, type of film (120/220), exposure number
Dark slide pocket
Also features databus connections to accept digital backs

Film Type: 120 roll film (16 exposures) 220 roll film (32 exposures)
Polaroid Land Pack Film as well as Fuji Polaroid (any of the 3 1/4 x 4 1/4" pack film series, i.e Fuji FP100C, Polaroid 669, 664, 679)
Film Speed: ISO 25 to 6400 1

close

Please Note:

Tripod Adapter N or N2 is required with a Polaroid Back. Adapter N2 has a larger base and contains anti-twist pins for secure camera support.

Lens Mount: Bayonet Mamiya 645 AF Mount; M645 Mount can be used with strict limitations (manual focus confirmation, stopped-down metering)
Also compatible with Hasselblad V series lenses (manual focus confirmation, focus aid, stop-down exposure metering). Requires optional Lens Mount Adapter #310-244 (Black) or #310-245 (Silver)

Shutter

Electronically controlled vertical metal focal-plane shutter

AE: 30 to 1/4000 sec. (1/8 step)
Manual: 30 to 1/4000 sec. (1/2 step)
X: (locks shutter speed to 1/125th sec. while allowing for full control of aperture values)
"B": (Bulb, electronically controlled)
"T" (Time, mechanically controlled)
Automatic shutter curtain open mechanism (opens when film magazine, Polaroid holder or digital back is removed, automatically closed when re-attached)

Shutter speed and aperture both can be set in 1/3 or 1/2 steps Electronic dial lock (in X, M, Av and Tv exposure modes)

Shutter Release: Utilizes standard screw-in type cable release located on shutter button
Remote-Control Terminal: Located on the left side of the body: Electromagnetic Cable Release RE401 (Mamiya #211755) is 5m and coiled; Electromagnetic Cable Release RE402 (Mamiya #211754) is 1m and is straight.

Self Timer: With shutter release mode selector 2 to 60sec. (default setting: 10sec., can be set in 1sec. steps between 2 and 10sec., and in 10sec steps between 10 and 60sec.)

Flash Synchronization: 1/125 sec. or slower, automatically sets to 1/125 when shutter speed dial is set to higher speeds (when Metz flash unit is used). In P mode, the shutter speeds are controlled to 1/125 ~ 1/60 sec.
Supports Metz SCA3002 system (SCA 3952 adapter required), and SCA 3000 and SCA 300 series (300 series requires both SCA 3952 and SCA 3000C converter)

Mirror Lock-Up: Electronically-activated by Mirror-Up switch on grip

Exposure Metering

5-segment evaluative center-weighted average (AV) with bright point elimination Spot (S) Variable Ratio Auto-Shift (A-S AUTO)

Manual (M)
Flash Sync (X)
Aperture priority AE (Av)
Shutter priority AE (Tv)
Programmed AE (P) with program shift: PH and PL settings possible

Metering Range: EV 2 to EV 19 (with ISO 100 film, f/2.8 lens)
Light Metering: TTL metering; center-weighted average (AV), spot (S) and auto A-S variable ration

Exposure Bracketing: Enabled with Auto-Bracketing button (2 or 3 frames selectable) , 0.3, 05, 0.7, 1EV step units selectable

Exposure Compensation: +/-3 EV or +/- 5EV (1/3, 1/2 or 1 steps)

Depth-of-Field Preview: Preview button on front of camera, aperture can be changed during DOF check

Viewfinder: Fixed prism finder magnification 0.71x
Built-in diopter adjustment (-2.5 to +0.5 diopter
Separate diopter correction lenses provide adjustment ranges of -5 to -2 diopter and 0 to +3 diopter)
Built-in eye-piece shield
Interchangeable focusing screens: Matte (Standard), Checker (Grid) and manual focus microprism for M645 lenses

Viewfinder Info

Focus mark
Out-of-focus direction marks
Aperture value
Shutter speed
Metering mode (A, S, A/S AUTO)
Exposure compensation value (difference between set value and actual value)
AE Lock
Bracketing Position
Battery Checker

External LCD - On camera body::
Aperture value
Shutter speed value
AEL
Battery check
Programmed AE
Programmed AE shift value
Data imprinting mode
Flash Compensation Indicator (Over/Under)
Auto-Bracketing indicator
Multiple Exposure indicator
Self-Timer indicator

On Interchangeable Film Magazine:
ISO speed
Type of film (120 or 220)
Exposure number
Buffer for ZD Digital Back v1.1 and newer

Film Transport: Automatic via built-in motor, single or continuous exposures 2 frames per second (with new HM402 Roll Film Magazine)

Multiple Exposure: Enabled with Multiple Exposure Button (2 to 6 exposures or unlimited); can be cancelled. More exposures may be dialed in before exposure set is complete

Focusing System: TTL phase-difference detection type, user-selectable focusing point (center, left, right or auto)
4 CCD line sensors in a | + | shape (area indicated on the focusing screen, 10.8 x 3.6mm)
Infrared AF Sub-Beam :
Activates automatically under low light, low contrast in Single (S) AF Mode
Switchable On/Off
Range: 29.5' with 80mm f/2.8 AF lens
Automatic switching to flash unit's built-in sub-beam when
Metz flash unit is attached with SCA 3952 adapter
AF Lock: Half-press on shutter release and AF Lock Button

Power Source: 6 "AA" batteries (alkaline-magnesium or rechargeable Nickel-metal hydride)

Custom Functions: 36 custom settings

Data Imprinting: 7 segment dot matrix
DATA mode imprints:
Exposure mode
Aperture value
Shutter speed value
Exposure compensation
Bracketing position (normal, over, under)
Metering mode
ID number
Lens Focal Length
DAY mode imprints:
Year
Month
Date
Time
ID number (switchable between enabled and disabled)

Tripod Mount: 1/4" and 3/8" included

Dimensions: 6 x 5 x 7.2" (153 x 128 x 184mm) (WHD)

Weight: 61oz. (1730g), without batteries

Miscellaneous: Remote Control: Terminal On side of body (works with remote triggering devices and electromagnetic cable releases)
Cable Release: On shutter button

Please Note: